FREE DELIVERY from 29 999 Ft
Country and language

Choose country and language

Make the shop your own.

Website language
What are you looking for today?
PHYSALIS ↗

Ultrasonic diffuser for essential oils Escape – Physalis

Ultrasonic diffuser for essential oils Escape – Physalis
YOUR GOOD CHOICENr 92898
13 483 Ft / pcs · including VAT
Product available
How would you like to buy?
1

You buy once. No recurring orders.

Product available
Free delivery from 29 999 Ft

Delivery is free on orders from 29 999 Ft. You'll see the available methods and delivery date in your basket. Details ↗

Secure shopping

You pay on the payment provider's page (Stripe, PayPal). Your card details never reach the shop. Details ↗

TAKE A CLOSER LOOK

Product description.

DESCRIPTION
Dimensions: 71 x 71 x 140 mm
Weight (without adapter): 150 g
Power: max. 5 W
Power adapter power: DC 5V/1A.
Water tank capacity: 55 ml.
Steam output: about 18 ml/hour in continuous mode and 9 ml/hour in intermittent mode.
Recommended area: 10 to 30 m2

The device sprays a mixture of water and essential oils into millions of micro-particles in the form of a mist. Effects: it purifies the air, humidifies and gives a subtle fragrance.
The device can be used in all kinds of rooms, locker rooms, offices, hotels, hospitals, beauty salons.

The set includes:
- Ultrasonic diffuser
- USB cable
- User manual

User manual:
- Unscrew and remove the lid, pour water to the marked height
- Add max. 3 - 5 drops of essential oil
- Replace and screw on the lid
- Connect the diffuser to the power source or USB port
- One press starts the continuous mode; two presses - intermittent mode 9 s ON, 9 s OFF; and three presses - turns off the device.

Cleaning the diffuser:
Before using a new type of essential oil, clean the device
- Unplug the diffuser from the power supply and remove the lid
- Pour out the residual water from the tank
- Wipe the tank with a soft, dry cloth.
- Use a cotton swab and a few drops of alcohol to clean the ultrasonic plate
- Use a damp cloth to clean the outside of the unit
- Do not use detergents, solvents or abrasives
- Take care that water does not get into the fan

Troubleshooting:
Problem: No steam
Possible cause: Using the wrong kind of water, e.g. tap water with high mineral content.
Solution: Use distilled or purified water

Problem: No steam
Possible cause: No water in the water tank
Solution: Use distilled or purified water

Problem: No or improper steam
Possible cause: The device needs cleaning. Essential oils have stuck to the ultrasonic plate
Solution: Clean the device according to the instructions. Use clean water and clean the ultrasonic plate with a cotton swab with a few drops of alcohol

Problem: No or improper steam
Possible cause: The water level is higher than the maximum level
Solution: Clean the device and fill it halfway with water. Add more water when the unit starts producing steam. Remove excess water and restart the device

Problem: No or improper steam
Possible cause: USB cable is not properly connected
Solution: Check that the USB cable is properly connected to the power source

Problem: The device does not stop even when the water tank is empty
Possible cause: The water level indicator is dirty
Solution: Clean the device according to the instructions. In particular, make sure that the ultrasonic plate is properly cleaned

Problem: No diffusion. Unit sprays water
Possible cause: Water is too cold
Solution: Replace cold water with warm water

CAUTION
- Use only clean water at room temperature to fill the tank. Never use boiled or very cold water
- Do not move the device after filling it with water
- If you do not use the device for a long time, unplug it from the electrical outlet and pour the water out of the tank
- Never hold your hand over the ultrasonic plate when the device is on
- Never wrap the adapter in paper, plastic or other similar material, as this will prevent the adapter from dissipating heat optimally, which may eventually burn the diaphragm
- Never touch the adapter with wet hands
- Never use liquids other than water and a few drops of essential oil
- Never direct the vapor onto walls, ceiling or furniture
- Do not attempt to disassemble the device
- Never tilt, move, empty or refill the diffuser when it is on
- Do not fill the unit with more liquid than indicated
- Clean the unit regularly to prevent malfunctions
- Always place the unit on a flat, stable and hard surface

RECOMMENDED STORAGE CONDITIONS
Keep out of reach of children and pets.

Product enquiry

Questions and answers.

QUESTIONS? OF COURSE.

Good to know
before buying.

Ingredients, labels and product details — answers close at hand.

Where can I find ingredients and allergen information?

You can find information supplied in the manufacturer's catalogue in the “Product description” section. Before buying, check the ingredients and any allergen information for your chosen variant.

You may also like.